The latest Dreame robot goes to the roller roller and put on the Nvidia AI to avoid obstacles

Deal Score0

Dreame aqua10 Ultra roller

In the absence of offers discover

The links presented above may not operate in the presence of an advertising blocker.

With a water washing function now present on almost all robot vacuum cleaners, we thought of the time of the revolving washer robots, but that was without counting on Dreame. The Chinese company announces the arrival of a new Aqua range in its catalog with a first model: the Ultra Roller Complete Aqua10. As on the washer robots of yesteryear, the aspiration is not totally forgotten, but the attention is clearly paid on washing with water.

A rinsed rinsed rinsed roller, and ventilated

The Ultra Roller Aqua10 is thus adorned with an unprecedented system, at Dreame at least, to wash hard floors. Goodbye the pads that turn on the back of the robot. The mop here is stuck on a roller to form the Aquaroll Roller Mop, which runs at a speed of 100 rpm to rub the ground while nozzles rinse the opposite surface. So far, nothing very revolutionary. We also find a similar system on the Z50 ultra of Mova, another brand of the Dreame group which offers solutions for the maintenance of the floors, without forgetting The S1 Pro Omni at Eufy,, S10 at Switchbot or The J20 Ultra at Eureka. In short, the roller mop is not new on the market, but it is accompanied on the Aqua10 Ultra sticking with technologies that Dreame present as unpublished.

Advertising, your content continues below

The first was baptized Fluffroll and consists of a second roll which runs at 1000 rpm against the main roller in opposite direction to ventilate the fibers of the mop and guarantee the best possible results, even in the tiling joints. Autoseal Roller Guard comes to imprison the row roller when the robot passes on a carpet to protect it from humidity.

Advertising, your content continues below

An obstacle detection system carried by the Nvidia AI

The carpets and carpets can thus be drawn into a single passage and without user intervention, since the ultra sticking aqua10 is also good with a suction function. Dreame even announces a power of 30,000 PA. We find with that the system of double hyperstream brush already crossed on The X50 Ultrabut we notice another novelty on this first Aqua robot: the Astrovision obstacle avoidance system.

Based on two HD cameras and the ISAAC de Nvidia platform, it must allow an analysis of 3D obstacles for ultra-preccosed avoidance. Isaac is a robotics platform that includes both hardware and software solutions and aims to accelerate the development of autonomous robots and systems for various and varied applications, which can go from handling to medicine. In short, rather sophisticated uses. We therefore expect a lot from the Ultra Roller Aqua10 in congested or disorderly environments.

In addition to avoiding obstacles, he also promises to overcome the thresholds up to 6cm thanks to the Proleap system also crossed on the X50 Ultra and he also inherits his navigation system toalift to go under the furniture. The Lidar can be lowered until it completely enters the chassis, but it is feared that the latter, just like that of the X50, is still quite thick for a minimal gain compared to other robots. Of course, the Ultra Roller Aqua10 is also accompanied by a multifunction station for a minimum of maintenance. In particular, it must wash the roller roller with water heated to 100 ° C.